News

Track Rollers: Rollers support the lower frame and distribute the weight of the machine across the track. Because the track rollers are installed at uneven spacing, they also align with the track sprocket spacing. Damaged track rollers can cause a variety of problems, including non-rotating rollers, increased travel resistance, and decreased equipment power. The non-rotating rollers can also cause severe wear between the chain and the track rollers. When working, avoid immersing track rollers in muddy or watery conditions for extended periods. After each day's work, lift one side of the track and drive the travel motor to remove dirt, gravel, and other debris. During winter construction, it is crucial to keep the track rollers dry, as there are floating seals between the outer rollers and the shaft. Water can freeze overnight, and when the excavator is moved the next day, the seals can come into contact with the ice, causing scratches and oil leaks.

Many people new to mining machinery parts may not fully understand what track rollers are. Today, we'll explain them in detail. Track rollers are one of the lower components of various mining equipment.

Track rollers are components of crawler-type construction machinery, bearing the entire weight of the machine. They often operate in gravel, muddy water, and in relatively harsh working environments. To ensure proper operation, track rollers must have good sealing properties. In winter, due to the cold weather, oil leakage is more likely to occur, thus impacting the progress of the machine. Let's learn about the causes of track roller oil leakage to help prevent this problem.

Track rollers, carrier rollers, and guide wheels primarily wear on their flanges and grooves. Under normal conditions, these parts wear due to contact with the track segments, resulting in even wear on both sides. Under abnormal conditions, wear is often more severe on one side, a phenomenon known as "track gnawing." Correctly analyzing the cause of wear and implementing appropriate measures can extend their service life. The following uses track rollers as an example to explain solutions to wear issues.

Track rollers are very important parts of excavators, but they may cause some wear and tear during long-term use and need to be replaced. However, many people do not know how to replace them. So what are the tips for replacing track rollers in excavators?

The track roller is used to support the weight of the body of construction machinery such as excavators and bulldozers, and rolls on the guide rails (track links) or track plates of the tracks. It is also used to limit the tracks to prevent lateral slippage. When the construction machinery equipment turns, the track roller forces the tracks to slide on the ground. But for many products on the market, how should we choose Bulldozer track roller?